Aditya Birla Chemicals
 
 
Spacer
More in this section
 

Epoxy systems

Epotec epoxy systems find application in floor toppings, grouts, heavy duty mortars, crack injection, wider crack-filling systems, expansion joint-filling systems and adhesives.

The various grades manufactured by Aditya Birla Chemicals (Thailand) for each product application are:

Self-levelling floor | Crack injection | High chemical resistance (H2SO4) | Heavy-duty floor/ mortar | Waterborne self-levelling floor | Marble top coat | Marble backing coat | Waterborne concrete coatings

Product specifications:
Self-levelling floor
Systems YD 515: TH 7301
Mix ratio1 100 : 60
Mix viscosity2 500
Gel time3 35
TFST4 5
Features Good gloss, hardness combined with good chemical resistance
 
Crack injection
Systems YD 522: TH 7212
Mix ratio1 100 : 25
Mix viscosity2 400
Gel time3 35
TFST4 2.5
Features Ultra low viscosity. Easier to penetrate deep in small, narrow cracks. Excellent bonding to concrete. Faster setting
High chemical resistance (H2SO4)
Systems BYD 7201: TH7201
Mix ratio1 100 : 33
Mix viscosity2 10,000
Gel time3 20
TFST4 3
Features Excellent chemical resistance to most of the strong acids, alkalies and solvents. Very minimal impact of alkalies, acids can cause discolouration when exposed. Can resist concentraetd H2SO4
 
Heavy-duty floor/mortar
Systems YD 522: THW 7903
Mix ratio1 100 : 25
Mix viscosity2 800
Gel time3 15
TFST4 2
Features Fast setting. Very good hardness, high compressive strength
Waterborne self-levelling floor
Systems YD 128: THW 4504
Mix ratio1 100 : 110
Mix viscosity2 -
Gel time3 60
TFST4 4
Features Water dilutable. Good hardness and abrasion resistance. Water vapour permeability. Can cure in thick sections. Can be laid on 1 day cure concrete
 
Marble top coat
Systems YD 522: THW 7209
Mix ratio1 100 : 25
Mix viscosity2 400
Gel time3 20
TFST4 10
Features Good gloss, colour and hardness
Marble backing coat
Systems YD 520: TH 7227
Mix ratio1 100 : 11
Mix viscosity2 500
Gel time3 10
TFST4 9
Features Good adhesion, good penetration in smaller cracks
   
Waterborne concrete coatings
Systems YD 128: THW 4502
Mix ratio1 100 : 140
Mix viscosity2 -
Gel time3 180
TFST4 6
Features Water dilutable. Glossy to semi-glossy finish. Excellent hardness. Suitable for low film thickness (< 0.5 mm)
1 Part by weight
2 Mix viscosity @ 25°C (cPs)
3 Gel time in minutes
4 Thin film set time in hours

Product enquiry
 
 
Spacer